StoVentec Fiber Cement
Drained and back-ventilated rainscreen wall system with a high-density, non-combustible fiber cement façade.
StoTherm ci GPS with Sto Fireblocking
Lightweight, energy-efficient Exterior Insulation and Finish System with StoCast or hand-trowel finish with Sto Fireblocking for compliance with 2022 NYC Building Code.
StoPowerwall ci with Sto Fireblocking
Insulated stucco wall systems with outbound graphite-enhanced expanded polystyrene or extruded polystyrene continuous insulation that incorporates a superior drainage plane and Sto Fireblocking to comply with 2022 NYC Building Code.
StoTherm ci with Sto Fireblocking
Lightweight, energy-efficient Exterior Insulation and Finish System with Sto Fireblocking for compliance with 2022 NYC Building Code
StoTherm ci GPS with Sto Strike Defense
Lightweight, energy-efficient Exterior Insulation and Finish System with StoCast or hand-trowel finish with Sto Strike Defense fortification layer for impact and puncture resistance from woodpeckers and blunt or sharp objects.
StoTherm ci with Sto Strike Defense
Lightweight, energy-efficient Exterior Insulation and Finish System with Sto Strike Defense fortification layer for impact and puncture resistance from woodpeckers and blunt or sharp objects.
StoTherm ci XPS with Sto Strike Defense
Lightweight, energy-efficient Exterior Insulation and Finish System that incorporates extruded polystyrene insulation with Sto Strike Defense fortification layer for impact and puncture resistance from woodpeckers and blunt or sharp objects.
StoPanel GPS ci
This lightweight prefabricated panel is both energy efficient and durable, with continuous insulation, StoGuard Air and Water-resistive Barrier (AWRB) and the patented “Sto Wedge” to provide an integral means of drainage that can provide up to R56 continuous exterior insulation.
StoTherm ci GPS
Lightweight, energy-efficient Exterior Insulation and Finish System with StoCast or hand-trowel finish
StoPanel Backup
StoPanel Backup is the starting point for all StoPanel cladding options. Consisting of cold formed steel, glass-mat faced gypsum sheathing and StoGuard Air and Water-resistive Barrier (AWRB); StoPanel Backup is the backbone of StoPanel Technology.
StoPanel Brick ci
StoPanel Brick ci is a lightweight, energy efficient prefabricated exterior wall panel with StoGuard continuous air and water-resistive barrier (AWRB), exterior insulation as an option and a variety of thin veneers, such as thin brick; all at a fraction of…
StoPanel Metal ci
Metal panel construction at a lower cost, with StoGuard Air and Water-resistive Barrier (AWRB) and exterior insulation standard.
StoPanel DriDesign
StoPanel Dri-Design® system features StoGuard Air and Water-resistive Barrier (AWRB), exterior insulation and fully customizable, unlimited design option. Plus, Dri-Design panels are easy to install and built to the highest industry standards. With Dri-Design the creative possibilities are endless.
StoPanel Classic ci
This lightweight prefabricated panel is both energy efficient and durable, with continuous insulation and StoGuard Air and Water-resistive Barrier (AWRB) standard. Versatile Sto Finishes allow for almost any design aesthetic.
StoPanel Classic NEXT ci
This lightweight prefabricated panel is both energy efficient and durable, with continuous insulation, StoGuard Air and Water-resistive Barrier (AWRB) and the patented “Sto Wedge” to provide an integral means of drainage. It can be finished with a wide variety of…
StoPanel LM Impact ci
Sto’s Impact panel system includes all the benefits of our Classic ci or Classic NExT ci panel systems, with the addition of high impact resistance that meets Miami-Dade small and large missile impact requirements. Upgrade to Stolit Lotusan textured finish…
StoPowerwall DrainScreen MVES
Uninsulated stucco wall system that incorporates a superior drainage plane and features a masonry veneer surface
StoPowerwall DrainScreen
Uninsulated stucco wall systems that incorporates a superior drainage plane
StoPowerwall
Uninsulated stucco wall systems that do not incorporate a defined drainage plane. Verify conformance with local building code requirements.
StoPanel Fiber Cement ci
This rainscreen system features StoGuard Air and Water-resistive Barrier (AWRB), exterior insulation and design flexibility, functionality and innovation with rainscreen design benefits that adds lasting weather protection and superior value.. StoVentro sub-construction provides a structural system that carries the dead…
StoPanel Precast ci
StoPanel Precast ci is a lightweight, energy efficient prefabricated exterior wall panel with StoGuard continuous air and water-resistive barrier (AWRB), exterior insulation and a variety of integral decorative & protective finish options to replicate precast concrete; all at a fraction…
StoPowerwall MVES
Uninsulated stucco wall with a masonry veneer surface that does not incorporate a defined drainage plane. Verify conformance with local building code requirements.
StoPowerwall HI
StoPowerwall system designed for hurricane performance on steel studs and gypsum sheathing. See Miami-Dade NOAs for detailed hurricane system information.
StoTherm ci HI-PLY
Lightweight, energy-efficient Exterior Insulation and Finish System designed hurricane performance on exterior plywood sheathing. See Miami-Dade NOAs for detailed hurricane system information.
StoPowerwall ExtraSeal
Direct applied to CMU uninsulated stucco wall system with a water-resistive Sto ExtraSeal air barrier system
StoPowerwall ci
Insulated stucco wall systems with outbound extruded polystyrene continuous insulation and that incorporates a superior drainage plane
StoQuik Silver DrainScreen MVES
Cement-board stucco system that incorporates a superior draninge plan and with a masonry veneer surface
StoVentec Render
Drained and back-ventilated rainscreen wall system with a Sto textured finish or StoCast finish
StoVentec Glass
Open joint, drained and back-ventilated rainscreen wall system with an opaque glass façade.
StoPanel Mineral ci
StoPanel® Mineral ci is a prefabricated exterior wall panel with noncombustible continuous insulation, StoGuard Air and Water-resistive Barrier (AWRB), and can be finished with a wide variety of standard and specialty Sto textured finish options.
StoVentec for masonry veneer facades
Drained and back-ventilated rainscreen wall system with a masonry veneer surface
StoTherm ci XPS
Lightweight, energy-efficient Exterior Insulation and Finish System that incorporates extruded polystyrene insulation
StoTherm ci MVES
Lightweight, energy-efficient Exterior Insulation and Finish System with a masonry veneer surface
StoTherm ci Mineral
Lightweight, energy-efficient Exterior Insulation and Finish System that incorporates mineral wool insulation
StoPanel MVES ci
StoPanel® MVES ci is an engineered insulating wall system with Adhered Masonry Veneer (AMV) – thin brick, natural stone, ceramic tile, or cultured stone. It combines superior air and weather tightness with excellent thermal performance and durability. It incorporates continuous…
StoPowerwall ExtraSeal MVES
Direct applied to CMU uninsulated stucco wall system with a water-resistive Sto ExtraSeal air barrier system
StoTherm ci HI-LM 180
Lightweight, energy-efficient Exterior Insulation and Finish System designed for designed for large and small missile impact performance over CMU substrates. See Miami-Dade NOAs for detailed hurricane system information.
StoTherm ci 1177 -SM
Lightweight, energy-efficient Exterior Insulation and Finish System designed for small missile impact performance on 16-gauge steel studs with gypsum sheathing. See Miami-Dade NOAs for detailed hurricane system information.
StoTherm ci 1177 -LM
Lightweight, energy-efficient Exterior Insulation and Finish System designed for large and small missile impact performance on 16-gauge steel studs with gypsum sheathing. See Miami-Dade NOAs for detailed hurricane system information.
StoPowerwall ci – Inbound
Insulated stucco wall systems with inbound extruded polystyrene continuous insulation and that incorporates a superior drainage plane
StoPanel 3DP with Branch Technology
Sto Panel Technology® has partnered with Branch Technology® to deliver unprecedented 3-dimensional design freedom for exterior walls. A prefabricated panelized wall system that includes all the building envelope control layers integrated with a unique, fully customizable 3D printed composite shape…
