StoColor Wood Stain
StoColor Wood Stain is an acrylic-based stain for use as a topcoat over StoCast Wood and StoSignature Wood. It provides superior UV protection for long lasting colors and is available in gloss or matte sheen. With 15 standard colors and the possibility for custom colors, designers will enjoy the creative freedom to follow their inspiration. Use it on vertical above grade walls in StoVentec®, StoTherm®, StoPowerwall®, StoQuik®Silver,StoPanel®, and StoLIte® wall systems, and on prepared concrete, concrete masonry, or stucco wall surfaces.
StoColor Wood Stain | White | 38151
Sample Print Setup
For your convenience, you may add reference information to your sample print. Simply fill out the information below and it will appear on your sample print. The information is not required.
Please note: The colors presented on this chart are representations. Actual color of manufactured product may vary slightly from the chart. Color perception is affected by degree of gloss, texture, and lighting conditions. For best results always request a product sample, select color under natural lighting conditions, and construct full scale job site mock ups for final color approval. Minor shade variations may occur from batch to batch (refer to batch no. on pail). Avoid installing separate batches side-by-side and avoid application in direct sunlight. Avoid installing new finish adjacent to weathered or aged finish. Sto Corp. will not be responsible for shade or color variation from batch to batch, variation caused by application or substrate deficiencies, or fading resulting from natural causes such as weather.
See Sto Tech Hotline Nos. 0694-C for helpful tips on prevention of color problems.
For Continuous Insulation (ci) select colors with light reflectance value of 20 or greater.