121 Details Available
Series 90.R.xx StoVentec Render +
 StoVentec® Render – Series 90Rxx Design Guide and Detail Booklet - Detail Booklets
 
90.R.001 StoVentec Render Carrier Board A attachment 16in-oc -160psf Ultimate Wind Load Capacity - Details
90.R.002 StoVentec Render StoVentro Bracket Spacing 36in-oc -160psf Ultimate Wind Load Capacity - Details
90.R.003 StoVentec Render Carrier Board A attachment 16in-oc -160psf Ultimate Wind Load Capacity - Details
90.R.004 StoVentec Render Carrier Board A attachment 16in-oc -120psf Ultimate Wind Load Capacity - Details
90.R.005 StoVentec Render Carrier Board A attachment 16in-oc -85psf Ultimate Wind Load Capacity - Details
90.R.010 – Carrier Board A+ attachment at Windows or Openings - Details
90.R.012 StoVentec Render System Build Up - Details
90.R.020A – System StoCast-Wood Elevation View - Details
90.R.020B – System StoCast-Wood Elevation View - Details
90.R.020C – System StoCast-Wood Elevation View - Details
90.R.021 StoVentec Render System Buildup StoCast-Wood - Details
90.R.022 – System Buildup StoCast-Wood ALUM-Bracket - Details
90.R.024 StoVentec Render System Buildup StoCast-Brick - Details
90.R.025 – System Buildup StoCast-Brick ALUM-Bracket - Details
90.R.030 – Carrier Board A+ Installation Horizontal Board Joint - Details
90.R.031 – Carrier Board A+ Installation Vertical Board Joint at T-Profile - Details
90.R.035 – System Top Edge Formation Sto Edge Protection Profiles - Details
90.R.036 – System Bottom Edge Formation Sto Edge Protection Profiles - Details
90.R.037 – System Side Edge Formation Sto Edge Protection Profiles - Details
90.R.045 – StoVentro Brackets and attachment locations - Details
90.R.046 StoVentec Render StoVentro Brackets and attachment locations Plan-View - Details
90.R.047 – StoVentro Aluminum Brackets and attachment locations Section-View - Details
90.R.048 – StoVentro Aluminum Brackets and attachment locations Plan-View - Details
90.R.049 – StoVentro Sub-construction Installation - Details
90.R.055 – Installation at grade with Sto Ventilation Profile exposed substrate - Details
90.R.065 – Installation at grade with Sto Ventilation Profile 150mm - Details
90.R.080 – StoVentec Fire Protection with Head Flashing Intumescent Strip over Lamella at window head NFPA-285 Compliant - Details
90.R.081 – StoVentec Fire Protection with Render Finish Intumescent Strip over Lamella at window head NFPA-285 Compliant - Details
90.R.085 – Window Jamb - Details
90.R.090 – Window Sill - Details
90.R.161 – Unconditioned Soffit Installation to Direct-applied Finish System for Soffits and Ceilings F601S - Details
90.R.162 – Conditioned Soffit Installation to Vertical Wall Installation - Details
90.R.163 – Conditioned Soffit Installation to Alternative Facade-system - Details
90.R.165 – Conditioned Soffit Installation - Details
90.R.170 – Soffit Transition to Vertical Wall Installation (Conditioned) - Details
90.R.171 – Vertical Wall Installation to Alternitive Soffit (Conditioned) - Details
90.R.180 – Parapet with 10mm ventilation - Details
90.R.300 – Scupper Penetration with Open Joint - Details
90.R.301 – Scupper Penetration Flashing with Open Joint - Details
90.R.302 – Scupper Penetration with Sto Joint Tape - Details
90.R.303 – Scupper Penetration Flashing with Sto Joint Tape - Details
90.R.390 – Wall Structural Joint - Details
90.R.400 – Inside Corner - Details
90.R.401 – Inside Corner with Open Joint - Details
90.R.410 – Outside Corner - Details
90.R.415 – Outside Corner Curved greater-than 8m-(26ft) with no cuts - Details
90.R.416 – Outside Corner Curved greater-than .5m-(20in) to less-than 8m-(26ft) with cut board - Details
90.R.417 – Outside Corner Curved with Foam Insulation - Details
90.R.419 – Installation to Alternative Facade substrate - Details
90.R.450 – Horizontal Joint Edge Protection Profile GT to GF - Details
90.R.451 – Horizontal Joint Edge Protection Profile G to G - Details
90.R.460 – Vertical Joint Edge Protection Profile GT to GF - Details
90.R.461 – Vertical Joint Edge Protection Profile G to G - Details
90.R.470 – Vertical Transition to Alternative Facade Wall Substrate - Details
90.R.474 – Returning to Alternative Facade-Wall Substrate - Details
90.R.475 – Horizontal Transition to Alternative Facade-Wall Substrate Above - Details
90.R.476 – Horizontal Transitionl under Alternative Facade-system - Details
90.R.478 – Horizontal Transition to Alternative Facade Wall Substrate Flush - Details
90.R.486 – Vertical Transition of – to Alternative Facade-Wall Substrate Render Proud - Details
90.R.490 – Inside Corner to Alternative Facade-Wall Substrate - Details
90.R.550 – Fire Protection with Intumescent Strip over Lamella at floor lines NFPA-285 Compliant - Details
90.R.555 StoVentec Render Fire Protection with metal break at floor lines NFPA-285 Compliant no brackets - Details
Back To Top

Your compare list

Compare
REMOVE ALL
COMPARE
0
×

Keep the Inspiration Coming!

Subscribe to the Sto Blog for the Latest Updates in Inspiring Building Design and Construction.

  • Please review our updated Privacy Policy
  • This field is for validation purposes and should be left unchanged.

SEARCH

Use the search bars below to search by keyword(s), by product name or by product number. If you are having problems finding information, please contact us here.

SITE SEARCH

PRODUCT SEARCH