More Powerful than Conventional Stucco
StoPowerwall™ Stucco and Powerwall® NExT Stucco Systems are made up of high-performance products that are designed to work together to form a superior wall cladding. These systems weigh less and can be installed faster than conventional stucco, with coatings and finishes that bridge hairline cracks to keep moisture out, enhancing the weather resistance and long term appearance of your cladding.
|
 StoPowerwall™ NExT Stucco System with StoGuard™ Waterproofing / Air Barrier
|  | StoPowerwall™ Stucco System
|
- Superior moisture protection and energy efficiency with StoGuard™ Waterproofing/Air Barrier
- Superior stucco performance with Powerwall® Stucco and finish products
- Superior Warranty: 10 year Moisture Protection Warranty
| |
- Superior Stucco Performance with Powerwall Stucco and finish products
- Up to a 10 year Sto Limited Materials Warranty.
|
| Four Basic Components of the StoPowerwall™ NExT Stucco System: | | Three Basic Components of the StoPowerwall™ Stucco System: |
| | | | | |
Moisture Protection
Stucco Base
Primer (optional)
Finish |  | |
Stucco Base
Primer (optional)
Finish |  |
| | | | | |
| Sto offers a choice of products for each component in the Powerwall system. The combination of products required will vary depending on the substrate used. |
| | | | | |
| Moisture Protection | | | | | |
 | | StoGuard™ Waterproofing/Air Barrier: a superior waterproofing and air barrier system for use beneath Powerwall® Stucco and other claddings over sheathing.
- Sto EmeraldCoat® has a built-in bond breaker to prevent the adhesion of stucco (which can lead to cracks in the stucco.)
- Sto Gold Coat® with no bond breaker may be used with a sheet bond breaking layer in the stucco assembly
Either Sto EmeraldCoat® or Sto Gold Coat® can be used in tandem with asphalt saturated felt moisture protection when a two ply moisture protection system beneath stucco is mandated by codes (e.g. wood-based sheathing) Consult ICC ES Report No. 1233 for Sto Guard code compliance. |
| | | | | |
| Stucco Base | | | | | |
 | | Powerwall® Stucco: controlled blend of portland cement, fibers, and other additives to which sand and water are added at the job site. Use for 1/2 inch to 7/8 inch stucco applications. Consult applicable code reports for assemblies and limitations of use: ICC ES Legacy Report No.9838B and ICC ES Report No. ESR-1607. Also consult Sto Guide Specification Nos. S501E or S501G.
Powerwall® Scratch and Brown Coat: Factory prepared portland cement base coat that conforms to ASTM C 926 when sand and water are added at the job site. Use when C 926 compliance is required by code and for conventional 7/8 inch 1 hour fire resistive stucco assemblies. Consult Sto Guide Specification Nos. S502E or S502G. |
| | | | | |
| Primers | | (optional component; recommended to enhance color, durability, and coverage of finish textures)
|
 | | Sto Hot Prime: tintable roller or spray applied primer. Use for high alkeline surfaces like freshly applied stucco to minimize efflorescence and to improve color uniformity and coverage of finish textures. Also reduced water absorption of stucco.
Sto Primer: tintable roller or spray applied primer. Use over fully cured stucco for improved color uniformity and coverage of finish textures. |
| | | | | |
| Finishes | | | | | |
 | | Powerwall®: flexible, textured, trowel-applied exterior wall finish with integral color. Available in five textues: Fine, Medium, Swirl, Swirl X, and Freeform.
Powerflex: highly flexible, textured, trowel-applied elastomeric exterior wall finish with integral color. Available in four textures: Fine, Medium, Swirl, and Freeform.
Powerflex Silco: highly flexible, trowel-applied elastomeric exterior wall finish with integral color and silicone enhancement for improved algae, dirt, and mildew resistance. Available in four textures: Fine, Medium, Swirl, and Freeform. |
| | | | | |