Stocorp.com
  Información Técnica en Español
Boletín de productos en Español
MSDS en Español
Product Bulletin Icons |
Welcome to the Sto Product Selector. You may utilize the following 3 ways to search for the various Sto Products including specialty coatings, EIFS(synthetic stucco), Concrete Repair, Stucco and Air/Moisture Barriers.
 |
|  |
|
|  |
| |  |
|  |
|
|
| | |
| Division: 03063
| |
| Sto Bonding Agent and Admixture - CR245
Sto Bonding Agent and Admixture is an acrylic latex for bonding new concrete, mortar or Sto Powerwall® Stucco to hardened concrete. It can also be used as an admixture in fresh concrete, mortar and Sto Powerwall® Stucco to increase adhesion and durability.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Bonding and Anti-Corrosion Agent - CR246
Sto Bonding and Anti-Corrosion Agent is a unique combination of Portland cement, microsilica, epoxy, and acrylic resin. Use it for bonding new concrete or mortar to old and for protecting reinforcing steel against rust and corrosion. When used as a bonding agent, it provides up to a 24-hour open time
Material Safety Data Sheet
Product Bulletin
Division: 03150
| |
| Sto Flexible Crack Filler - CR214
Sto Flexible Crack Filler is an acrylic-based, non-sag crack filler for sealing and weatherproofing cracks. Use it to fill hairline cracks in vertical concrete, stucco or masonry block surfaces. Its convenient cartridge packaging provides a fast way to fill cracks, up to 18-inch wide.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Leveler - 244
Sto Leveler is a polymer-modified, cement-based, glass fiber-reinforced product used to patch or level irregular masonry, concrete or plaster/stucco wall surfaces. Apply the product from 1/8" to 1/4" (3-6 mm) thick.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Repair Mesh - CR218
Sto Repair Mesh is a flexible fiberglass mesh that reinforces acrylic compounds, membranes, stucco, or Portland cement-based products. Embed it in materials applied over cracks to prevent the cracks from reappearing. It is also used in corner details for extra support.
Material Safety Data Sheet
Product Bulletin
Division: 03360
| |
| Sto Concrete Coating Smooth - 232
Sto Concrete Coating Smooth is an acrylic-based interior and exterior coating. This product is designed to perform as a block filler/primer in exterior or interior applications.
Material Safety Data Sheet
Product Bulletin
| |
| StoCoat™ Acryl Plus - 648
New name! Previously Sto Protective Concrete Coating - CR648
StoCoat Acryl Plus is an acrylic-based coating that protects against weather, salts and environmental pollutants. Use it for protecting vertical or horizontal concrete, stucco, EIFS, masonry, or previously acrylic coated surfaces. It comes in a variety of colors, and has a semi-gloss sheen, making it an easy way to improve a substrate’s appearance.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Skim Coat - CR216
Sto Skim Coat is a cement-based patching mortar, surface leveler and ground coat reinforced with fibers to prevent cracking. Use it for patching or leveling vertical concrete, stucco or masonry surfaces. Apply it from 1/8- to 1/2-inch (3 to 12 mm) thick, or in lifts for deeper applications.
Material Safety Data Sheet
Product Bulletin
Division: 03600
| |
| StoPoxy™ Binder LM - CR630
StoPoxy™ Binder LM is a solvent-free, moisture-insensitive, low modulus, two-component, 100% solids epoxy binder meeting ASTM C-881 Type III, Classes B & C, Grade 1 for multiple uses.
Use as neat epoxy binder for polymer concrete(broadcast) overlays on bridges and elevated slabs. Also use in epoxy mortar for patching, and as a low-modulus crack filler.
Material Safety Data Sheet
Product Bulletin
Division: 03910
| |
| StoPrep™ Architectural - CR6031
StoPrep™ Architectural is a low VOC, water-based paint remover that will effectively lift urethanes, lacquers, latexes, alkyds, elastomerics and varnish. Recommended for use on architectural surfaces such as wood, brick, and masonry where non-lead based paints are present or in any area where worker safety or damage to delicate equipment may be a concern. StoPrep™ Architectural contains no TAP's or HAP's and offers easy clean-up with soap and water or denatured alcohol.
Material Safety Data Sheet
Product Bulletin
| |
| StoPrep™ Concrete Etcher - CR6012
StoPrep™ Concrete Etcher is a concrete etch compound specifically designed to provide a surface profile on green and mature concrete. The depth of the etching achieved with this compound is the same as hydrochloric or muriatic acid with 80% less odor and a more uniform etch than liquid etch materials. Safer for use than hydrochloric or muriatic acid, the residue is easily removed by rinsing with water.
Material Safety Data Sheet
Product Bulletin
| |
| StoPrep™ HD/Floor - CR6051
StoPrep™ HD/Floor is a low VOC, water-based paint remover that will effectively lift highly cross-linked urethane and epoxy topcoats and primers, alkyds, and the toughest of industrial coatings and linings. This low odor product is capable of lifting fuel resistant primers, some inorganic primers and coal tar epoxies. Recommended for use in petrochemical plants, chemical tank farms, nuclear facilities and any area where worker safety or damage to delicate equipment may be a concern. StoPrep™ HD/Floor contains no TAP's or HAP's and offers easy clean-up with soap and water or denatured alcohol.
Material Safety Data Sheet
Product Bulletin
| |
| StoPrep™ Universal - CR6021
StoPrep™ Universal is a low VOC, water-based paint remover that will effectively lift epoxies, urethanes, lead-based architectural coatings and powder coatings. Recommended for use on steel, aluminium, concrete, masonry and wood or in any area where worker safety or damage to delicate equipment may be a concern. StoPrep™ Universal contains no TAP's or HAP's and offers easy clean-up with soap and water or denatured alcohol.
Material Safety Data Sheet
Product Bulletin
Division: 03930
| |
| Sto Extended Full-Depth Repair Mortar CI - CR311CIX
Sto Extended Full-Depth Repair Mortar with integral corrosion inhibitor is a single-component cement based mortar for structurally repairing or overlaying deteriorated concrete. Use on horizontal surfaces for repairs from 1 1/2 (38 mm). It has been pre-extended using kiln dried uniform pea gravel to allow for deeper applications. Its formula provides increased strength gain and improved performance for repair applications.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Fiber-Reinforced Shotcrete - CR306
Sto Fiber-Reinforced Shotcrete is a durable, cement-based, dry-process shotcrete mortar for structurally repairing deteriorated concrete. It has been modified with microsilica and fiber for superior physical strengths. Use it on vertical or overhead surfaces for repairs greater than 1/2 inch (12 mm).
Material Safety Data Sheet
Product Bulletin
| |
| Sto Flowable Mortar - CR730
Sto Flowable Mortar is a polymer-modified, cement-based mortar for structurally repairing deeply deteriorated concrete. Use with form-and-pour or form-and-pump repairs from 1/2 to 2 inches (12 mm to 51 mm) or extend it with aggregate for deeper applications.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Full-Depth Repair Mortar CI - CR311CI
Sto Full-Depth Repair Mortar with integral corrosion inhibitor is a single-component cement based mortar for structurally repairing or overlaying deteriorated concrete. Use on horizontal surfaces for repairs from 1/2 to 4 inches (12 to 102 mm) or extend it with aggregate for deeper applications. Its formula provides increased strength gain and improved performance for repair applications.
Material Safety Data Sheet
Product Bulletin
| |
| Sto High-Strength Shotcrete - CR305
Sto High-Strength Shotcrete is a durable, cement-based, dry-process shotcrete mortar for structurally repairing deteriorated concrete. It has been fortified with microsilica for superior physical strengths. Use it on vertical or overhead surfaces for repairs greater than 1/2 inch (12 mm).
Material Safety Data Sheet
Product Bulletin
| |
| Sto Overhead Mortar with CI - CR702CI
Sto Overhead Mortar with integral corrosion inhibitor is a single component, polymer-modified, cement-based mortar for structurally repairing deteriorated concrete.
Material Safety Data Sheet
Product Bulletin
| |
| StoPatch Repair Mortar - CR211
StoPatch Repair Mortar is a single-component cement-based mortar for structurally repairing or overlaying deteriorated concrete. Use on horizontal surfaces for repairs from 1/2 to 4 inches (12 to 102 mm) or extend it with aggregate for deeper applications.
Material Safety Data Sheet
Product Bulletin
| |
| StoPatch Extended Repair Mortar - CR211X
StoPatch Extended Repair Mortar is a single-component cement-based mortar for structurally repairing or overlaying deteriorated concrete. Use on horizontal surfaces for repairs from 1 1/2 to 6 inches (38 to 152 mm) or extend it with aggregate for deeper applications.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Rapid Repair Mortar - CR310
Sto Rapid Repair Mortar is a microsilica-modified, cement based mortar for structurally repairing or overlaying deteriorated concrete. Use on horizontal surfaces for repairs from 1/2 to 4 inches (12 to 102 mm) or extend it with aggregate for deeper applications. May be top-coated with epoxy-based materials in 4-6 hours.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Thin-Coat Mortar - CR700
Sto Thin-Coat Mortar is a polymer-modified, cement based mortar for resurfacing deteriorated concrete. Use on horizontal or vertical surfaces for repairs from 1/8 to 1/4 inches (3 mm to 6 mm).
Material Safety Data Sheet
Product Bulletin
| |
| Sto Trowel Grade Mortar w/CI - CR701CI
Sto Trowel-Grade Mortar with integral corrosion inhibitor is a polymer-modified, cement-based mortar for structurally repairing or overlaying deteriorated concrete. Use on horizontal surfaces for repairs from 1/4 to 2 inches (6 mm to 51 mm) or extend it with aggregate for deeper applications.
Material Safety Data Sheet
Product Bulletin
Epoxies
| |
| StoPoxy™ Adhesive - CR631
StoPoxy™ Adhesive is a solvent-free, moisture-insensitive, medium viscosity, two-component, 100% solids epoxy adhesive meeting ASTM C-881 Type I, II, IV, V, Classes B & C, Grade 2 for multiple uses.
Use for the structural bonding of fresh to hardened and new to old concrete; structural crack repair of larger cracks and as a structural adhesive for concrete, masonry, metal, wood, etc. Can also be used to vertically anchor rebar, dowels, and threaded rod.
Material Safety Data Sheet
Product Bulletin
| |
| StoPoxy™ Binder - CR633
StoPoxy™ Binder is a solvent-free, moisture-insensitive, two-component, epoxy binder meeting ASTM C-881 Type I, II, IV, V, Classes B & C, Grade 1 for multiple uses.
Use for the pressure injection of cracks in structural concrete and for bonding of irregular surfaces. Also use for the gravity feed of cracks in horizontal concrete and masonry, as well as for epoxy mortar patching and overlay of interior horizontal surfaces.
Material Safety Data Sheet
Product Bulletin
| |
| StoPoxy™ Binder LM - CR630
StoPoxy™ Binder LM is a solvent-free, moisture-insensitive, low modulus, two-component, 100% solids epoxy binder meeting ASTM C-881 Type III, Classes B & C, Grade 1 for multiple uses.
Use as neat epoxy binder for polymer concrete(broadcast) overlays on bridges and elevated slabs. Also use in epoxy mortar for patching, and as a low-modulus crack filler.
Material Safety Data Sheet
Product Bulletin
| |
| StoPoxy™ Quick-Set Gel - CR634
StoPoxy™ Quick-Set Gel is a high strength two-component, epoxy adhesive anchoring gel, meeting ASTM C-881 Type I, II, IV, V Classes A, B & C, Grade 3* for multiple uses. (*Except gel time)
Use to chemically anchor bolts, dowels and pins. Also use for cap sealing and port setting. Can be used for pressure-injection of cracks in structural concrete and for bonding of irregular surfaces.
Material Safety Data Sheet
Product Bulletin
Waste Management - Solidifier
| |
| StoSet 9000 Waste Solidifier - CR6090
StoSet 9000 Waste Solidifier offers an environmentally safe way to dispose of acrylic and latex based textured finishes, paints and coatings, such as those used in EIFS and Stucco. Most landfills do not accept these types of products in liquid form. Adding StoSet 9000 solidifies the liquid waste so that it can be safely discarded. It is also great for quickly containing jobsite paint spills.
Material Safety Data Sheet
Product Bulletin
| |
| | |
|